Pump kit JUNIORFLUX
 |
|
| Features and benefits | Pump Type |
| – for filling, transferring or dispensing small amounts of acids, alkalis, deionized water, cleaning agents, photo developers – sealless in the liquid section – shaft in Hastelloy C – impellor in ETFE – outer-Ø 25 mm – thread on outlet G 1 A (BSP 1″ male) – ease of handling due to lightweight construction (2 kg) – ergonomic handle for single-hand operation – optimum carboy emptying due to ideal impellor design |
F314 PP-25/19 in Polypropylene |
| Immersion length | Motor Type |
| 700 mm | – Commutator motor 230 Watt, 230 Volt, 50 Hz, IP 24 – including power supply cable, 5 m long, and 2-speed switch for speed control |
| Accessories supplied with the pump | |
| – Hose connector PP – Flexible PVC hose DN 13, 1,5 m long – 2 hose clips – Lever tap PP, seal FKM |
|
Pump kit Acids and alkalis
 |
|
| Features and benefits | Pump Type |
| – for transferring acids and alkalis like boric acid, hydrochloric acid, hydrofluoric acid (diluted), phosphoric acid, and liquid fertilizers – unique barrel pump design in PP throughout the world: a steel cored inner tube provides the ultimate in stability and extended service life of the mechanical seal – even at high temperatures – sealed inner tube, the liquid being pumped cannot enter the inner tube – suitable for transferring almost all liquid fluids – optimum barrel emptying due to ideal impellor design – to be stripped for cleaning with a minimum of effort |
F 430 PP-40/33 in Polypropylene |
| Immersion length | Motor Type |
| 1000 and 1200 mm | – Commutator motor Type F 417, 450 Watt, IP 24 – with power supply cable , 5 m long, and 3-pole plug – compact design with optimal cooling and low noise level |
| Accessories supplied with the pump | |
| – Hose connection PP – Flexibel PVC hose DN 19, 2 m long – 2 hose clips – Quick action tap PP, seal FKM – Compression gland PP |
|
Pump kit concentrated acids and alkalis
 |
|
| Features and benefits | Pump Type |
| – for transferreing concentrated acids and alkalis like chromic acid, nitric acid, sulphric acid and sodium hypchlorate – unique barrel pump design in PVDF throughout the world: a steel cored inner tube provides the ultimate in stability and extended service life of the mechanical seal – even at high temperatures – sealed inner tube, the liquid being pumped cannot enter the inner tube – optimum barrel emptying due to ideal impellor design – to be stripped for cleaning with a minimum of effort |
F 430 PVDF-40/33 in Polyvinylidenfluoride |
| Immersion length | Motor Type |
| 1000 and 1200 mm | – Commutator motor Type F 458, 460 Watt, IP 55 – with power supply cable, 5 m ong, and safety plug – totally enclosed, fan cooled motor design with special corrosion-resistant painting, making this model particularly suitable for use in corrosive, vapour loaden atmospheres |
| Accessories supplied with the pump | |
| – Hose connection PVDF – Chemical hose DN 19, 2 m long – 2 hose clips – Quick action tap PVDF, seal FKM – Compression gland PP |
|
Pump kit Petroleum products
 |
|
| Features and benefits | Pump Type |
| – for transferring petroleum products like Diesel oil, fuel oil and hydraulic oil – with mechanical seal – optimum barrel emptying due to ideal impellor design – to be stripped for cleaning with a minimum of effort |
· F 430 AL-41/38 in Aluminium alloy |
| Immersion length | Motor Type |
| 1000 and 1200 mm | – Commutator motor Type F 417, 450 Watt, IP 24 – with power supply cable, 5 m long, and 2-pole plug – compact design with optimal cooling and low noise level alternatively: – powerful commutator motor Type F 457, 800 Watt, IP 24 – with power supply cable, 5 m long, and 2-pole plug – with no-volt release, compact design – with optimal cooling and low noise level |
| Accessories supplied with the pump | |
| – Hose connection AL – 2 m flexible petroleum hose DN 25 – 2 hose clips – Quick action tap AL, seal NBR – Compression gland PP |
|
Pump kit High flammability liquids
 |
|
| Features and benefits | Pump Type |
| – for transferring high flammability liquids like acetone, ethyl alcohol, methyl alcohol, toluene, xylene – tested and certified according to Directive 94/9/EC-ATEX 100a, category 1/2, for use in Zone 0 – sealless in the liquid section – safe dry running of the pump – inner tube and helix shaped support bearings completely self-draining – thus preventing from any mixtures of liquids being pumped – no contamination of the liquid being pumped by shaft lubricants – optimum barrel emptying due to ideal impellor design – to be stripped for cleaning with a minimum of effort |
F 424 S-43/38 in stainless steel 316 L / 316 Ti |
| Immersion length | Motor Type |
| 1000 and 1200 mm | – Commutator motor Type F 460 Ex, 460 Watt, II 2 G EEx de IIC T6 – with power supply cable, 5 m long, and safety plug – explosion-proof to ATEX 100a, category 2, according to Directive 94/9/EC, EC-Type-Examination Certificate No. PTB 97 ATEX 1035 – robust double shell housing in aluminium, very low noise level – improved ventilation system providing optimal cooling and ensuring an extended service life alternatively: – Air motor Type F 416 Ex, 470 Watt at 6 bar, II 2 G cp IIC T6 |
| Accessories supplied with the pump | |
| – Earth ground wire, 2 m long – Chemical hose kit DN 19, 2 m long, complete with swaged fittings in brass on both ends – Quick action tap in brass nickel-plated, seal FEP/PTFE – Compression gland PP, electrically conductive |
|
Pump kit Universal applications
 |
|
| Features and benefits | Pump Type |
| – for transferring liquids in the following industries: food, cosmetics, pharmaceutical, paint and varnishes – tested and certified according to Directive 94/9/EC-ATEX 100a, category 1/2, for use in Zone 0 – with mechanical seal – optimum barrel emptying due to ideal impellor design – to be stripped for cleaning with a minimum of effort |
F 430 S-41/38 in stainless steel 316 L / 316 Ti |
| Immersion length | Motor Type |
| 1000 and 1200 mm | – Commutator motor Type F 460 Ex, 460 Watt, II 2 G EEx de IIC T6 – with power supply cable, 5 m long, and safety plug – explosion-proof to ATEX 100a, category 2, according to Directieve 94/9/EC, EC-Type-Examination Certificate No. PTB 97 ATEX 1035 – robust double shell housing in aluminium, very low noise level – improved ventilation system providing optimal cooling and ensuring an extended service lifealternatively:- Air motor Type F 416 Ex, 470 Watt at 6 bar, II 2 G cp IIC T6 – explosion-proof to ATEX 100a, category 2, according to Directive 94/9/EC, PTB-Registration No. 02 ATEX D022 – very lightweight and extremely powerful motor, overload-proof – easily variable speed control by adjusting either the air supply pressure or volume |
| Accessories supplied with the pump | |
| – Earth ground wire, 2 m long – Chemical hose kit DN 19, 2 m long, complete with swaged fittings in stainless steel on both ends – Quick action tap in stainless steel, seal FEP/PTFE – Compression gland PP, electrically conductive |
|
Pumpen-Set 99,98 % barrel emptying
 |
|
| Features and benefits | Pump Type |
| – the safe and cost-efficient solution for transferring high value or hazardous liquids – optimim barrel emptying, remains of less than 0,05 l – tested and certified according to Directive 04/9/EC-ATEX 100a, category 1/2, for use in Zone 0 – with mechanical seal – to be stripped for cleaning with a minimum of effort |
F 425 S-41/34 in stainless steel 316 L / 316 Ti |
| Immersion length | Motor Type |
| 1000 and 1200 mm | – Commutator motor Type F 460 Ex, 460 Watt, II 2 G EEx de IIC T6 – with power supply cable, 5 m long, and safety plug – explosion-proof to ATEX 100a, category 2, according to Directieve 94/9/EC, EC-Type-Examination Certificate No. PTB 97 ATEX 1035 – robust double shell housing in aluminium, very low noise level – improved ventilation system providing optimal cooling and ensuring an extended service lifealternatively:- Air motor Type F 416 Ex, 470 Watt at 6 bar, II 2 G cp IIC T6 – explosion-proof to ATEX 100a, category 2, according to Directive 94/9/EC, PTB-Registration No. 02 ATEX D022 – very lightweight and extremely powerful motor, overload-proof – easily variable speed control by adjusting either the air supply pressure or volume |
| Accessories supplied with the pump | |
| – Earth ground wire, 2 m long – Chemical hose kit DN 19, 2 m long, complete with swaged fittings in stainless steel on both ends – Quick action tap in stainless steel, seal FEP/PTFE – Compression gland PP, electrically conductive |
|
Type F 550 S with three-phase motor
 |
|
| Features and benefits | Positive displacement pump – eccentric worm type |
| – recommended for low to high viscosity, pasty, but still free flowing products – eccentric worm-drive pump with bearing flange in aluminium – with mechanical seal or stuffing box – low wear due to low pump speed – vertical and horizontal use – outer diameter of pump tube 50 or 54 mm – Type F 550 SX.-50/21 for use in Zone 0, tested and certified according to Directive 94/9/EC – ATEX 100a, EC-Type-Examination Certificate No. PTB 99 ATEX 4050/4051 X |
– smooth pumping with very little turbulences – low wear, no valves, vanes etc. – vertical and horizontal use |
| The pump is available in | Immersion lengths |
| – Pump: stainless steel 316 L / 316 Ti (S) – Stator: PTFE, NBR, CSM, FKM |
700, 1000 and 1200 mm (other lengths on request) |
| Available drive motors | The picture shows |
| – Three-phase motor 0,75 or 1,1kW, 930 or 700 min-1, jet-proof to IP 55 or explosion-proof to ATEX 100a – Air motor 0,5 – 1,8 kW, 1000 min-1 at 6 bar, explosion-proof to ATEX 100a |
Eccentric worm-drive pump Type F 550 S-50/21 with three-phase motor |
Type F 550 GS with commutator motor Type F460 Ex
 |
|
| Features and benefits | Positive displacement pump – eccentric worm type |
| – recommended for low to medium viscosity products, up to max. 30.000 mPas (cP) – lightweight and easy-to-handle eccentric worm-drive pump with planetary gear – with mechanical seal or stuffing box – low wear due to low pump speed – low weight of complete pump and motor unit – outer diameter of pump tube 50 or 54 mm – Type F 550 GSX.-50/21 for use in Zone 0, tested and certified according to Directive 94/9/EC – ATEX 100a, EC-Type-Examination Certificate No. PTB 99 ATEX 4050/4051 X |
– smooth pumping with very little turbulences – low wear, no valves, vanes etc. |
| The pump is available in | Immersion lengths |
| – Pump: stainless steel 316 L / 316 Ti (S) – Stator: PTFE, NBR, CSM, FKM |
700, 1000 and 1200 mm (other lengths on request) |
| The picture shows | |
| Eccentric worm-drive pump Type F 550 GS-54/26 with commutator motor Type F 460 Ex | |
Type F 550 GS6 with three-phase motor Type F 403/4
 |
|
| Features and benefits | Positive displacement pump – eccentric worm type |
| – recommended for viscous products up to max. 80.000 mPas (cP) – lightweight and easy-to-handle eccentric worm-drive pump with planetary gear – extremely smooth transfer operations with a speed of 210 min-1 or 420 min-1 only – with mechanical seal – outer diameter of pump tube 50 or 54 mm |
– smooth pumping with very little turbulences – low wear, no valves, vanes etc. |
| The pump is available in | Immersion lengths |
| – Pump: stainless steel 316 L / 316 Ti (S) – Stator: PTFE, NBR, CSM, FKM |
700, 1000 and 1200 mm (other lengths on request) |
| Available drive motors | The picture shows |
| – Single-phase AC motor with capacitor switch Type F 403/2 0,50 kW, 2850 min-1, jet-proof to IP 55 – Single-phase AC motors with capacitor switch Type F 403/4 0,30 or 0,55 kW, 1450 min-1, jet-proof to IP 55 – Three-phase motor Type F 403/4, 0,55 kW, 1450 min-1, jet-proof to IP 55 – Three-phase motor Type F 403/2, 0,75 kW, 2850 min-1, jet-proof to IP 55 |
Eccentric worm-drive pump Type F 550 GS6-50/21 with three-phase motor Type F 403/4 |
VISCOFLUX
 |
|
| Features and benefits | Frame-mounted total package including |
| – allowing the transfer of high viscosity, pasty, non-flowing products, like for example grease, ointment, paste, silicon, paint and varnishes, etc. – especially designed for use with 200-Litre-Barrels – smooth pumping by using gentle, progressive cavity pumping technology – compact construction with lifting handlees for easy portability and quick assembly – fast strip down for cleaning or sterilisation – flexible lip seal with tight fit to the inside of the barrel ensures an optimum barrel emptying – drive motors: three-phase or air motors in differing kW-ratings and speeds |
– guide cylinder with follower plate in stainless steel and clamp connection to the pump – flexible lip seal customized for barrel diameter – two hydraulic rams in aluminium for lifting the pump and follower plate after barrel emptying – pneumatic control unit for rams |
Type F 520 S-50/45 with three-phase motor
 |
|
| Features and benefits | High viscosity liquid pump – Archimedean screw type |
| – recommended for viscous products up to max. 20.000 mPas – screw pump with bearing flange in aluminium – very robust pump design – with mechanical seal – can be operated against a closed outlet – outer diameter of pump tube 50 mm |
– low wear, no valves, vanes etc. – easy to strip down – ideal for transferring free flowing fluids |
| The pump is available in | Immersion lengths |
| – Pump: stainless steel 316 L / 316 Ti (S) – Stator: stainless steel 316 Ti (S) |
700, 1000 and 1200 mm |
| Available drive motors | The picture shows |
| – Three-phase motors 0,75 – 3,0 kW, 2850 min-1, jet-proof to IP 55 – Air motors 1,0 – 2,6 kW, 3000 min-1 at 6 bar, explosion-proof to ATEX 100a |
Screw pump Type F 520 S-50/45 with three-phase motor |
Distinciones
